Welded wire mesh machine
Type: MLG-5*2
1-welded wire diameter: 1.6mm to 2.5mm
2-welded aperture: 50mm, 75mm, 100mm and so on
3-welded width: at most 1524mm
4-welded speed: 80...
Welded mesh panel machine
Type: WHJ-250-6
1-welded wire diameter: 2.5mm to 6.0mm
2-welded aperture: 25mm to 200mm, or more
3-welded width: at most 2500mm
4-welded length: 500mm to...
Welded mesh panel machine
Type: WHJ-150-6
1-welded wire diameter: 4.0mm to 6.0mm
2-welded aperture: 50mm to 200mm, or more
3-welded width: at most 1500mm
4-welded length: 500mm to...
Applications and Features The central chip uses the current mode PWM keyer, the double closed loop negative feedback control, the electric current peak value inhibting ability is stonger.Complete...
WS200 is a TWO-IN-ONE Digital Inverter Tig Welder (200A) / Stick (MMA) welder (160A). You would have to purchase 2 separate machines to do what this ONE machine can do! This Tig welder is easier to...
1Materials: high quality low carbon steel wire, stainless steel wire.2 Welding characteristics including galvanizing before or after Welding. It is divided to hot-dipped, electrical galvanizing,...
1. Special assistant DC reactance circuit is adopted that short circuit frequency of the small current zone is increased. Then, the voltaic arc is soft and stable. In addition, the short circuit...
Main features:A. High precision. Multi-function. It satisfies all Welding requirements of 0201 resistance and capacitance, fine spacing QFP, SOP, PLCC, BGA, CSP and so on. It meets the requirements...
Twin Welding HoseFeatures:Smooth surface, Tensil polyester yarn reinforce in middle.Application:Oxygen and acetylene gas converyHope this will be the beginning of good business relationship between...
Welded wire mesh is made with quality low-carbon steel wire through Welding, then through surface treatment of electric galvanizing, hot-dipped zinc coating or plastic coating. Welded wire mesh...
The Lanthanated Tungsten Electrode became very popular in the circle of Welding in the world soon after it was developed because of its good Welding performance. The electric conductivity of...
Can suitable for all of the component, especially Micro BGA component. 1. Adopt infrared weld technology which independent exploration. 2. Use infrared heat, it is easy to cut through, heat...
Specifications1 Power consumption 5200W2 Top Heater 800W3 Bottom Heater 3rd Temperature Zone (Infrared plates) 3000W 2nd Temperature Zone (Hot-air Nozzle) 1200W4 Power Requirement AC 220V ±...
Application and featuresSuitable for butt Welding of plastic pipes and / or fittings made of PE, PP, and PVDF in a ditch in worksite or workshopConsists of basic frame, hydraulic unit, planing tool,...
Inquiry Basket(